[ 0.834202] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.834215] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.834217] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.834220] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.834227] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.834262] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.834292] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.834297] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.834339] efifb: probing for efifb
[ 0.834358] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 4160k, total 4160k
[ 0.834360] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.834360] efifb: scrolling: redraw
[ 0.834362] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.834449] Console: switching to colour frame buffer device 170x48
[ 0.834463] fb0: EFI VGA frame buffer device
[ 0.834474] intel_idle: MWAIT substates: 0x11142120
[ 0.834476] intel_idle: v0.4 model 0x3D
[ 0.834477] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.835676] ACPI: AC Adapter [ADP0] (on-line)
[ 0.835772] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.836071] ACPI: Lid Switch [LID0]
[ 0.836114] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.836118] ACPI: Power Button [PWRB]
[ 0.836157] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.836159] ACPI: Power Button [PWRF]
[ 0.836567] GHES: HEST is not enabled!
[ 0.836751] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.839081] Linux agpgart interface v0.103
[ 0.840333] brd: module loaded
[ 0.840944] loop: module loaded
[ 0.841158] libphy: Fixed MDIO Bus: probed
[ 0.841161] tun: Universal TUN/TAP device driver, 1.6
[ 0.841162] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>
[ 0.841202] PPP generic driver version 2.4.2
[ 0.841345] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.841347] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.841367] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.841376] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.841458] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.841531] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.841533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.841535] usb usb1: Product: xHCI Host Controller
[ 0.841537] usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
[ 0.841538] usb usb1: SerialNumber: 0000:00:14.0
[ 0.841646] hub 1-0:1.0: USB hub found
[ 0.841659] hub 1-0:1.0: 11 ports detected
[ 0.844996] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.845000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.845032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.845034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.845035] usb usb2: Product: xHCI Host Controller
[ 0.845037] usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
[ 0.845038] usb usb2: SerialNumber: 0000:00:14.0
[ 0.845138] hub 2-0:1.0: USB hub found
[ 0.845145] hub 2-0:1.0: 4 ports detected
[ 0.846636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.846642] ehci-pci: EHCI PCI platform driver
[ 0.846751] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.846756] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 0.846767] ehci-pci 0000:00:1d.0: debug port 2
[ 0.850665] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.850677] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc4319000
[ 0.863437] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.863490] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.863492] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.863494] usb usb3: Product: EHCI Host Controller
[ 0.863495] usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
[ 0.863497] usb usb3: SerialNumber: 0000:00:1d.0
[ 0.863726] hub 3-0:1.0: USB hub found
[ 0.863733] hub 3-0:1.0: 2 ports detected
[ 0.863876] ehci-platform: EHCI generic platform driver
[ 0.863894] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.863899] ohci-pci: OHCI PCI platform driver
[ 0.863911] ohci-platform: OHCI generic platform driver
[ 0.863920] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.863975] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.879552] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.879555] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.879845] mousedev: PS/2 mouse device common for all mice
[ 0.880304] rtc_cmos 00:01: RTC can wake from S4
[ 0.880449] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.880477] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.880486] i2c /dev entries driver
[ 0.880554] device-mapper: uevent: version 1.0.3
[ 0.880618] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised:
dm-devel@redhat.com [ 0.880637] Intel P-state driver initializing.
[ 0.880771] Consider also installing thermald for improved thermal control.
[ 0.880778] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.880818] EFI Variables Facility v0.08 2004-May-17
[ 0.892255] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.916174] PCCT header not found.
[ 0.916177] ACPI PCC probe failed.
[ 0.916268] TCP: cubic registered
[ 0.916374] NET: Registered protocol family 10
[ 0.916577] NET: Registered protocol family 17
[ 0.916592] Key type dns_resolver registered
[ 0.917018] Loading compiled-in X.509 certificates
[ 0.917893] Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
[ 0.917914] registered taskstats version 1
[ 0.919799] Key type trusted registered
[ 0.920085] ACPI: Battery Slot [BAT0] (battery present)
[ 0.922847] Key type encrypted registered
[ 0.922858] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.922863] ima: No TPM chip found, activating TPM-bypass!
[ 0.922890] evm: HMAC attrs: 0x1
[ 0.923477] Magic number: 0:671:140
[ 0.923493] block ram5: hash matches
[ 0.923533] acpi device:11: hash matches
[ 0.923588] rtc_cmos 00:01: setting system clock to 2016-01-23 18:08:31 UTC (1453572511)
[ 0.923652] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.923653] EDD information not available.
[ 0.923730] PM: Hibernation image not present or could not be loaded.
[ 0.924057] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 0.924058] Write protecting the kernel read-only data: 12288k
[ 0.924283] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 0.924384] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 0.935879] systemd-udevd[120]: starting version 204
[ 0.949825] wmi: Mapper loaded
[ 0.961123] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.961132] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.964547] ahci 0000:00:1f.2: version 3.0
[ 0.967714] [drm] Initialized drm 1.1.0 20060810
[ 0.968376] r8169 0000:02:00.0 eth0: RTL8106e at 0xffffc9000066a000, 50:7b:9d:1d:9a:47, XID 10900800 IRQ 48
[ 0.980067] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 0.980075] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 0.980487] scsi host0: ahci
[ 0.980622] scsi host1: ahci
[ 0.980694] ata1: SATA max UDMA/133 abar m2048@0xc4318000 port 0xc4318100 irq 47
[ 0.980696] ata2: DUMMY
[ 1.006560] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 1.006613] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 1.006682] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 1.006860] pci 0000:04:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 1.006862] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.RP05.PXSX handle
[ 1.006880] checking generic (d0000000 410000) vs hw (b0000000 10000000)
[ 1.006882] checking generic (d0000000 410000) vs hw (c0000000 2000000)
[ 1.006911] nouveau 0000:04:00.0: enabling device (0106 -> 0107)
[ 1.007138] nouveau [ DEVICE][0000:04:00.0] BOOT0 : 0xb06190b1
[ 1.007140] nouveau [ DEVICE][0000:04:00.0] Chipset: GK208B (NV106)
[ 1.007142] nouveau [ DEVICE][0000:04:00.0] Family : NVE0
[ 1.023836] nouveau [ VBIOS][0000:04:00.0] using image from ACPI
[ 1.023989] nouveau [ VBIOS][0000:04:00.0] BIT signature found
[ 1.023992] nouveau [ VBIOS][0000:04:00.0] version 80.28.95.00.04
[ 1.024799] nouveau [ VBIOS][0000:04:00.0] running init tables
[ 1.087404] nouveau [ PMC][0000:04:00.0] MSI interrupts enabled
[ 1.087447] nouveau E[ PIBUS][0000:04:00.0] HUB0: 0x6013d4 0x00005701 (0x1b708200)
[ 1.087462] nouveau [ PFB][0000:04:00.0] RAM type: DDR3
[ 1.087464] nouveau [ PFB][0000:04:00.0] RAM size: 1024 MiB
[ 1.087465] nouveau [ PFB][0000:04:00.0] ZCOMP: 0 tags
[ 1.087527] nouveau E[ PIBUS][0000:04:00.0] HUB0: 0x10ecc0 0xffffffff (0x1c70822c)
[ 1.089540] nouveau [ VOLT][0000:04:00.0] GPU voltage: 600000uv
[ 1.155307] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.175299] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.287078] usb 1-1: New USB device found, idVendor=1ea7, idProduct=0066
[ 1.287081] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.287083] usb 1-1: Product: 2.4G Wireless Mouse&Keyboard
[ 1.290470] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.298343] usbcore: registered new interface driver usbhid
[ 1.298345] usbhid: USB HID core driver
[ 1.299263] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.300079] input: 2.4G Wireless Mouse&Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:1EA7:0066.0001/input/input6
[ 1.305324] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/100
[ 1.305327] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.307588] usb 3-1: New USB device found, idVendor=8087, idProduct=8001
[ 1.307591] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.307873] hub 3-1:1.0: USB hub found
[ 1.307957] hub 3-1:1.0: 8 ports detected
[ 1.311416] ata1.00: configured for UDMA/100
[ 1.311533] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 1.311756] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.311760] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.311817] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.311832] sd 0:0:0:0: [sda] Write Protect is off
[ 1.311835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.311874] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.355383] hid-generic 0003:1EA7:0066.0001: input,hidraw0: USB HID v1.10 Keyboard [2.4G Wireless Mouse&Keyboard] on usb-0000:00:14.0-1/input0
[ 1.355703] input: 2.4G Wireless Mouse&Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:1EA7:0066.0002/input/input7
[ 1.363404] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ 1.364113] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.399238] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.411555] hid-generic 0003:1EA7:0066.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [2.4G Wireless Mouse&Keyboard] on usb-0000:00:14.0-1/input1
[ 1.527482] usb 1-4: New USB device found, idVendor=0bda, idProduct=0129
[ 1.527485] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.527487] usb 1-4: Product: USB2.0-CRW
[ 1.527489] usb 1-4: Manufacturer: Generic
[ 1.527490] usb 1-4: SerialNumber: 20100201396000000
[ 1.531541] usbcore: registered new interface driver rtsx_usb
[ 1.695117] usb 1-6: new high-speed USB device number 4 using xhci_hcd
[ 1.827040] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[ 1.874248] psmouse serio1: synaptics: queried max coordinates: x [..5716], y [..4880]
[ 1.919767] usb 1-6: New USB device found, idVendor=13d3, idProduct=5744
[ 1.919771] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.919772] usb 1-6: Product: Lenovo EasyCamera
[ 1.919824] psmouse serio1: synaptics: queried min coordinates: x [1252..], y [1020..]
[ 2.009230] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2a800, board id: 3187, fw id: 1955965
[ 2.066027] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 2.206931] usb 1-7: new full-speed USB device number 5 using xhci_hcd
[ 2.335121] usb 1-7: No LPM exit latency info found, disabling LPM.
[ 2.336126] usb 1-7: New USB device found, idVendor=0bda, idProduct=b728
[ 2.336129] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.336131] usb 1-7: Product: Bluetooth Radio
[ 2.336132] usb 1-7: Manufacturer: Realtek
[ 2.336134] usb 1-7: SerialNumber: 00e04c000001
[ 2.386850] nouveau [ PTHERM][0000:04:00.0] FAN control: none / external
[ 2.386866] nouveau [ PTHERM][0000:04:00.0] fan management: automatic
[ 2.386888] nouveau [ PTHERM][0000:04:00.0] internal sensor: yes
[ 2.386942] nouveau [ CLK][0000:04:00.0] 07: core 405 MHz memory 648 MHz
[ 2.387022] nouveau [ CLK][0000:04:00.0] 0a: core 405-954 MHz memory 1620 MHz
[ 2.387126] nouveau [ CLK][0000:04:00.0] 0f: core 405-954 MHz memory 1800 MHz
[ 2.387212] nouveau [ CLK][0000:04:00.0] --: core 405 MHz memory 648 MHz
[ 2.405031] nouveau E[ PBUS][0000:04:00.0] MMIO read of 0x00000000 FAULT at 0x6013d4 [ IBUS ]
[ 2.405520] [TTM] Zone kernel: Available graphics memory: 1979914 kiB
[ 2.405521] [TTM] Initializing pool allocator
[ 2.405526] [TTM] Initializing DMA pool allocator
[ 2.405535] nouveau [ DRM] VRAM: 1024 MiB
[ 2.405536] nouveau [ DRM] GART: 1048576 MiB
[ 2.405539] nouveau W[ DRM] Pointer to TMDS table invalid
[ 2.405541] nouveau [ DRM] DCB version 4.0
[ 2.405543] nouveau W[ DRM] Pointer to flat panel table invalid
[ 2.414893] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.414899] [drm] Initialized nouveau 1.2.1 20120801 for 0000:04:00.0 on minor 0
[ 2.639117] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.751146] random: nonblocking pool is initialized
[ 2.826818] Switched to clocksource tsc
[ 7.812934] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 7.813040] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 7.813044] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 15.322492] Adding 4095696k swap on /dev/sda6. Priority:-1 extents:1 across:4095696k FS
[ 15.482653] systemd-udevd[373]: starting version 204
[ 15.634943] lp: driver loaded but no devices found
[ 15.644986] ppdev: user-space parallel port driver
[ 15.743769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.762129] Bluetooth: Core ver 2.20
[ 15.762169] NET: Registered protocol family 31
[ 15.762172] Bluetooth: HCI device and connection manager initialized
[ 15.762177] Bluetooth: HCI socket layer initialized
[ 15.762180] Bluetooth: L2CAP socket layer initialized
[ 15.762188] Bluetooth: SCO socket layer initialized
[ 15.776795] usbcore: registered new interface driver btusb
[ 15.783513] cfg80211: Calling CRDA to update world regulatory domain
[ 15.806261] rtlwifi: module verification failed: signature and/or required key missing - tainting kernel
[ 15.828185] Using firmware rtlwifi/rtl8723befw.bin
[ 15.847851] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 15.848161] rtlwifi: wireless switch is on
[ 15.852294] AVX2 version of gcm_enc/dec engaged.
[ 15.852297] AES CTR mode by8 optimization enabled
[ 15.870252] sound hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 15.870551] sound hdaudioC1D0: autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 15.870556] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.870559] sound hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 15.870561] sound hdaudioC1D0: mono: mono_out=0x0
[ 15.870564] sound hdaudioC1D0: inputs:
[ 15.870568] sound hdaudioC1D0: Internal Mic=0x1a
[ 15.870571] sound hdaudioC1D0: Mic=0x19
[ 15.871154] sound hdaudioC1D0: Enable sync_write for stable communication
[ 15.874395] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 15.874497] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 15.890540] kvm: disabled by bios
[ 15.903019] intel_rapl: Found RAPL domain package
[ 15.903023] intel_rapl: Found RAPL domain core
[ 15.903025] intel_rapl: Found RAPL domain uncore
[ 15.903027] intel_rapl: Found RAPL domain dram
[ 15.924940] device-mapper: multipath: version 1.7.0 loaded
[ 15.933244] [drm] Memory usable by graphics device = 4096M
[ 15.933250] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 15.933252] fb: switching to inteldrmfb from EFI VGA
[ 15.933296] Console: switching to colour dummy device 80x25
[ 15.933358] [drm] Replacing VGA console driver
[ 15.941329] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 15.941334] [drm] Driver supports precise vblank timestamp query.
[ 15.941424] vga_switcheroo: enabled
[ 15.941530] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.028082] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.029002] fbcon: inteldrmfb (fb0) is primary device
[ 16.029084] Console: switching to colour frame buffer device 170x48
[ 16.029094] i915_bpo 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 16.029097] i915_bpo 0000:00:02.0: registered panic notifier
[ 16.029187] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 16.029373] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS
[ 16.029389] ACPI: Video Device [PXSX] (multi-head: yes rom: yes post: no)
[ 16.029502] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:01/input/input11
[ 16.029740] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915_bpo])
[ 16.029746] [drm] Initialized i915_bpo 1.6.0 20150522 for 0000:00:02.0 on minor 1
[ 16.058008] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 16.058237] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 16.058407] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 16.092110] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.233810] media: Linux media interface: v0.10
[ 16.241365] Linux video capture interface: v2.00
[ 16.249862] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5744)
[ 16.304698] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input15
[ 16.304794] usbcore: registered new interface driver uvcvideo
[ 16.304797] USB Video Class driver (1.1.1)
[ 16.407381] cfg80211: World regulatory domain updated:
[ 16.407385] cfg80211: DFS Master region: unset
[ 16.407386] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.407388] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.407390] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.407392] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.407393] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.407395] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 17.659580] init: failsafe main process (738) killed by TERM signal
[ 18.280317] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.280322] Bluetooth: BNEP filters: protocol multicast
[ 18.280327] Bluetooth: BNEP socket layer initialized
[ 18.282005] Bluetooth: RFCOMM TTY layer initialized
[ 18.282015] Bluetooth: RFCOMM socket layer initialized
[ 18.282022] Bluetooth: RFCOMM ver 1.11
[ 18.818214] init: cups main process (830) killed by HUP signal
[ 18.818228] init: cups main process ended, respawning
[ 21.957866] r8169 0000:02:00.0 eth0: link down
[ 21.957901] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.971857] init: samba-ad-dc main process (1143) terminated with status 1
[ 22.696591] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 23.660817] nouveau E[ PIBUS][0000:04:00.0] HUB0: 0x6013d4 0xbadf5701 (0x1c708200)
[ 24.474790] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 24.490643] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 24.494495] wlan0: authenticated
[ 24.494852] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 24.503807] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=5)
[ 24.504835] wlan0: associated
[ 24.504844] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 24.504973] cfg80211: Calling CRDA for country: RU
[ 24.535107] cfg80211: Regulatory domain changed to country: RU
[ 24.535110] cfg80211: DFS Master region: unset
[ 24.535112] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 24.535114] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 24.535116] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 25.267103] init: plymouth-upstart-bridge main process ended, respawning
[ 30.796611] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 30.796724] ACPI: \_SB_.PCI0.RP05.PXSX: failed to evaluate _DSM
[ 30.796728] ACPI Warning: \_SB_.PCI0.RP05.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 2579.461175] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 2579.496356] cfg80211: Calling CRDA to update world regulatory domain
[ 2579.498586] cfg80211: World regulatory domain updated:
[ 2579.498590] cfg80211: DFS Master region: unset
[ 2579.498591] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2579.498594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2579.498596] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2579.498597] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2579.498599] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2579.498600] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2581.038732] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 2581.061887] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 2581.065653] wlan0: authenticated
[ 2581.069381] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 2581.074321] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=5)
[ 2581.075375] wlan0: associated
[ 2581.075432] cfg80211: Calling CRDA for country: RU
[ 2581.077285] cfg80211: Regulatory domain changed to country: RU
[ 2581.077289] cfg80211: DFS Master region: unset
[ 2581.077290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2581.077293] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2581.077295] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 2952.806199] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 2952.833416] cfg80211: Calling CRDA to update world regulatory domain
[ 2952.835650] cfg80211: World regulatory domain updated:
[ 2952.835653] cfg80211: DFS Master region: unset
[ 2952.835654] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2952.835657] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2952.835659] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2952.835660] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2952.835662] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2952.835663] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 2954.467008] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 2954.490781] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 2954.529227] wlan0: authenticated
[ 2954.530416] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 2954.552591] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=5)
[ 2954.553622] wlan0: associated
[ 2954.553683] cfg80211: Calling CRDA for country: RU
[ 2954.555658] cfg80211: Regulatory domain changed to country: RU
[ 2954.555661] cfg80211: DFS Master region: unset
[ 2954.555663] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2954.555665] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2954.555667] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 3284.170407] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 3284.201612] cfg80211: Calling CRDA to update world regulatory domain
[ 3284.234241] cfg80211: World regulatory domain updated:
[ 3284.234245] cfg80211: DFS Master region: unset
[ 3284.234246] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3284.234249] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3284.234251] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3284.234252] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3284.234254] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3284.234255] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3285.739463] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 3285.762946] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 3285.766027] wlan0: authenticated
[ 3285.766689] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 3285.771544] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=5)
[ 3285.773232] wlan0: associated
[ 3285.773287] cfg80211: Calling CRDA for country: RU
[ 3285.775228] cfg80211: Regulatory domain changed to country: RU
[ 3285.775231] cfg80211: DFS Master region: unset
[ 3285.775233] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3285.775235] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3285.775237] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 3447.167485] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 3447.194807] cfg80211: Calling CRDA to update world regulatory domain
[ 3447.197179] cfg80211: World regulatory domain updated:
[ 3447.197182] cfg80211: DFS Master region: unset
[ 3447.197184] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3447.197186] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3447.197188] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3447.197190] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3447.197191] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3447.197192] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 3448.736960] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 3448.759361] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 3448.763058] wlan0: authenticated
[ 3448.763753] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 3448.769707] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=3)
[ 3448.770595] wlan0: associated
[ 3448.770888] cfg80211: Calling CRDA for country: RU
[ 3448.773261] cfg80211: Regulatory domain changed to country: RU
[ 3448.773265] cfg80211: DFS Master region: unset
[ 3448.773267] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3448.773269] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3448.773271] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 7905.212138] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 7905.243429] cfg80211: Calling CRDA to update world regulatory domain
[ 7905.245760] cfg80211: World regulatory domain updated:
[ 7905.245764] cfg80211: DFS Master region: unset
[ 7905.245765] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7905.245768] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7905.245769] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7905.245771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7905.245772] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7905.245774] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 7906.781133] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 7906.804188] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 7906.836075] wlan0: authenticated
[ 7906.836361] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 7906.870864] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=3)
[ 7906.871267] wlan0: associated
[ 7906.871325] cfg80211: Calling CRDA for country: RU
[ 7906.873232] cfg80211: Regulatory domain changed to country: RU
[ 7906.873238] cfg80211: DFS Master region: unset
[ 7906.873239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 7906.873241] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 7906.873243] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 7930.597802] perf interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 9143.980332] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 9144.015602] cfg80211: Calling CRDA to update world regulatory domain
[ 9144.017899] cfg80211: World regulatory domain updated:
[ 9144.017903] cfg80211: DFS Master region: unset
[ 9144.017904] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9144.017907] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9144.017908] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9144.017910] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9144.017911] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9144.017913] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9145.553691] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 9145.576721] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 9145.593067] wlan0: authenticated
[ 9145.596652] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 9145.611462] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=3)
[ 9145.611861] wlan0: associated
[ 9145.611922] cfg80211: Calling CRDA for country: RU
[ 9145.613773] cfg80211: Regulatory domain changed to country: RU
[ 9145.613776] cfg80211: DFS Master region: unset
[ 9145.613777] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9145.613780] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9145.613781] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[ 9333.028001] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[ 9333.051287] cfg80211: Calling CRDA to update world regulatory domain
[ 9333.053545] cfg80211: World regulatory domain updated:
[ 9333.053548] cfg80211: DFS Master region: unset
[ 9333.053550] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9333.053552] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9333.053554] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9333.053555] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9333.053557] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9333.053558] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 9334.684735] wlan0: authenticate with e8:94:f6:3b:e7:16
[ 9334.708231] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[ 9334.748924] wlan0: authenticated
[ 9334.752277] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[ 9334.769449] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=3)
[ 9334.769845] wlan0: associated
[ 9334.769895] cfg80211: Calling CRDA for country: RU
[ 9334.771870] cfg80211: Regulatory domain changed to country: RU
[ 9334.771874] cfg80211: DFS Master region: unset
[ 9334.771875] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 9334.771877] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 9334.771879] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[10077.055087] wlan0: Connection to AP e8:94:f6:3b:e7:16 lost
[10077.082328] cfg80211: Calling CRDA to update world regulatory domain
[10077.084652] cfg80211: World regulatory domain updated:
[10077.084658] cfg80211: DFS Master region: unset
[10077.084659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[10077.084662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[10077.084664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[10077.084665] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[10077.084666] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[10077.084668] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[10078.624527] wlan0: authenticate with e8:94:f6:3b:e7:16
[10078.647805] wlan0: send auth to e8:94:f6:3b:e7:16 (try 1/3)
[10078.650882] wlan0: authenticated
[10078.651360] wlan0: associate with e8:94:f6:3b:e7:16 (try 1/3)
[10078.656802] wlan0: RX AssocResp from e8:94:f6:3b:e7:16 (capab=0x421 status=0 aid=3)
[10078.657832] wlan0: associated
[10078.657942] cfg80211: Calling CRDA for country: RU
[10078.659807] cfg80211: Regulatory domain changed to country: RU
[10078.659810] cfg80211: DFS Master region: unset
[10078.659811] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[10078.659813] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[10078.659815] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A)
[10952.763386] systemd-hostnamed[18584]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!