[ 0.000000] [mem 0xb6200000-0xba9fffff] page 2M
[ 0.000000] [mem 0xbaa00000-0xbaabefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbafff000-0xbaffffff]
[ 0.000000] [mem 0xbafff000-0xbaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x34548000-0x3629bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BAFFE210 00009C (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000BAFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x00000000BAFEC000 00A029 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x00000000BAFBB000 000040
[ 0.000000] ACPI: SLIC 0x00000000BAFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x00000000BAFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x00000000BAFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x00000000BAFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x00000000BAFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x00000000BAFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFEB000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x00000000BAFE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x00000000BAFE7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x00000000BAFE6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x00000000BAFE4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE2000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFE1000 000A92 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x00000000BAFDD000 0023C1 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f5f1000-0x23f5f5fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xb3fecfff]
[ 0.000000] node 0: [mem 0xb4d6e000-0xb4daffff]
[ 0.000000] node 0: [mem 0xb61b0000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f5fffff]
[ 0.000000] On node 0 totalpages: 2063578
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11741 pages used for memmap
[ 0.000000] DMA32 zone: 751422 pages, LIFO batch:31
[ 0.000000] Normal zone: 20440 pages used for memmap
[ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3fed000-0xb4d6dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb4db0000-0xb61affff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaabf000-0xbaebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbaebf000-0xbafbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbafbf000-0xbaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb000000-0xbf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f200000 s86144 r8192 d32640 u262144
[ 0.000000] pcpu-alloc: s86144 r8192 d32640 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2031312
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.19.0-32-generic root=UUID=f5043ea7-e2d1-4153-bf58-4cf4bb5580cf ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8009536K/8254312K available (7920K kernel code, 1174K rwdata, 3756K rodata, 1408K init, 1292K bss, 244776K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:488 16
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.924 MHz processor
[ 0.000036] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.84 BogoMIPS (lpj=9179696)
[ 0.000038] pid_max: default: 32768 minimum: 301
[ 0.000044] ACPI: Core revision 20141107
[ 0.009164] ACPI: All ACPI Tables successfully acquired
[ 0.009187] Security Framework initialized
[ 0.009203] AppArmor: AppArmor initialized
[ 0.009204] Yama: becoming mindful.
[ 0.009737] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011845] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012798] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012808] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013005] Initializing cgroup subsys memory
[ 0.013011] Initializing cgroup subsys devices
[ 0.013013] Initializing cgroup subsys freezer
[ 0.013015] Initializing cgroup subsys net_cls
[ 0.013017] Initializing cgroup subsys blkio
[ 0.013019] Initializing cgroup subsys perf_event
[ 0.013021] Initializing cgroup subsys net_prio
[ 0.013023] Initializing cgroup subsys hugetlb
[ 0.013047] CPU: Physical Processor ID: 0
[ 0.013048] CPU: Processor Core ID: 0
[ 0.013053] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.013053] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.013439] mce: CPU supports 9 MCE banks
[ 0.013451] CPU0: Thermal monitoring enabled (TM1)
[ 0.013458] process: using mwait in idle threads
[ 0.013461] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.013461] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.013597] Freeing SMP alternatives memory: 32K (ffffffff81e87000 - ffffffff81e8f000)
[ 0.027012] ftrace: allocating 30021 entries in 118 pages
[ 0.041864] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081531] smpboot: CPU0: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (fam: 06, model: 3a, stepping: 09)
[ 0.081537] TSC deadline timer enabled
[ 0.081560] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.081579] ... version: 3
[ 0.081580] ... bit width: 48
[ 0.081581] ... generic registers: 4
[ 0.081582] ... value mask: 0000ffffffffffff
[ 0.081583] ... max period: 0000ffffffffffff
[ 0.081584] ... fixed-purpose events: 3
[ 0.081585] ... event mask: 000000070000000f
[ 0.082462] x86: Booting SMP configuration:
[ 0.082464] .... node #0, CPUs: #1
[ 0.096040] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096144] #2 #3 #4 #5 #6 #7
[ 0.177855] x86: Booted up 1 node, 8 CPUs
[ 0.177858] smpboot: Total of 8 processors activated (36718.78 BogoMIPS)
[ 0.185223] devtmpfs: initialized
[ 0.188148] evm: security.selinux
[ 0.188149] evm: security.SMACK64
[ 0.188150] evm: security.SMACK64EXEC
[ 0.188151] evm: security.SMACK64TRANSMUTE
[ 0.188151] evm: security.SMACK64MMAP
[ 0.188152] evm: security.ima
[ 0.188153] evm: security.capability
[ 0.188203] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.188372] pinctrl core: initialized pinctrl subsystem
[ 0.188474] RTC time: 22:35:38, date: 01/10/16
[ 0.188573] NET: Registered protocol family 16
[ 0.189025] cpuidle: using governor ladder
[ 0.193022] cpuidle: using governor menu
[ 0.193104] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.193105] ACPI: bus type PCI registered
[ 0.193107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.193184] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.193187] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.193273] PCI: Using configuration type 1 for base access
[ 0.193583] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.193584] mtrr: probably your BIOS does not setup all CPUs.
[ 0.193585] mtrr: corrected configuration.
[ 0.197444] ACPI: Added _OSI(Module Device)
[ 0.197446] ACPI: Added _OSI(Processor Device)
[ 0.197448] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.197449] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.200506] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.203298] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.203762] ACPI: Dynamic OEM Table Load:
[ 0.203771] ACPI: SSDT 0xFFFF880235762000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120111)
[ 0.204363] ACPI: Dynamic OEM Table Load:
[ 0.204370] ACPI: SSDT 0xFFFF8802356CD000 000303 (v01 PmRef ApIst 00003000 INTL 20120111)
[ 0.204885] ACPI: Dynamic OEM Table Load:
[ 0.204890] ACPI: SSDT 0xFFFF8802356E2E00 000119 (v01 PmRef ApCst 00003000 INTL 20120111)
[ 0.206549] ACPI: Interpreter enabled
[ 0.206555] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
[ 0.206560] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.206574] ACPI: (supports S0 S3 S4 S5)
[ 0.206575] ACPI: Using IOAPIC for interrupt routing
[ 0.206600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.313203] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.313209] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.313321] \_SB_.PCI0:_OSC invalid UUID
[ 0.313322] _OSC request data:1 1f 0
[ 0.313326] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.313944] PCI host bridge to bus 0000:00
[ 0.313947] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.313949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.313951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.313952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.313954] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.313961] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.314044] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.314080] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.314112] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.314153] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.314164] pci 0000:00:02.0: reg 0x10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.314171] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.314176] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.314274] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.314297] pci 0000:00:14.0: reg 0x10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.314371] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.314406] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.314447] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.314471] pci 0000:00:16.0: reg 0x10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.314550] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.314630] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.314652] pci 0000:00:1a.0: reg 0x10: [mem 0xd3a19000-0xd3a193ff]
[ 0.314745] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.314801] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.314844] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.314862] pci 0000:00:1b.0: reg 0x10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.314940] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.314977] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.315014] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.315100] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.315173] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.315258] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.315341] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.315363] pci 0000:00:1d.0: reg 0x10: [mem 0xd3a18000-0xd3a183ff]
[ 0.315457] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.315512] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.315552] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.315725] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.315745] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.315754] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.315762] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.315771] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.315779] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.315787] pci 0000:00:1f.2: reg 0x24: [mem 0xd3a17000-0xd3a177ff]
[ 0.315835] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.315901] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.315918] pci 0000:00:1f.3: reg 0x10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.315939] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.316075] pci 0000:01:00.0: [10de:0de9] type 00 class 0x030000
[ 0.316087] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.316098] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.316109] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.316117] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.316125] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.316195] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.321045] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.321051] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.321055] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.321061] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.321223] pci 0000:02:00.0: [1969:1090] type 00 class 0x020000
[ 0.321337] pci 0000:02:00.0: reg 0x10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.321386] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x207f]
[ 0.321913] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322035] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.329079] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.329099] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.329104] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.329199] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.329231] pci 0000:03:00.0: reg 0x10: [mem 0xd3800000-0xd380ffff 64bit]
[ 0.329389] pci 0000:03:00.0: supports D1
[ 0.329391] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.329424] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.337054] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.337066] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.389333] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.389381] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.389426] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.389472] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.389516] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.389562] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.389610] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.389655] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.389750] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.389783] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.389869] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.389871] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.389875] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.389877] vgaarb: loaded
[ 0.389878] vgaarb: bridge control possible 0000:01:00.0
[ 0.389879] vgaarb: no bridge control possible 0000:00:02.0
[ 0.390103] SCSI subsystem initialized
[ 0.390140] libata version 3.00 loaded.
[ 0.390163] ACPI: bus type USB registered
[ 0.390179] usbcore: registered new interface driver usbfs
[ 0.390187] usbcore: registered new interface driver hub
[ 0.390214] usbcore: registered new device driver usb
[ 0.390341] PCI: Using ACPI for IRQ routing
[ 0.391888] PCI: pci_cache_line_size set to 64 bytes
[ 0.391944] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.391946] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.391947] e820: reserve RAM buffer [mem 0xb3fed000-0xb3ffffff]
[ 0.391948] e820: reserve RAM buffer [mem 0xb4db0000-0xb7ffffff]
[ 0.391950] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.391951] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.391953] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
[ 0.392050] NetLabel: Initializing
[ 0.392051] NetLabel: domain hash size = 128
[ 0.392052] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.392065] NetLabel: unlabeled traffic allowed by default
[ 0.392125] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.392130] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.394169] Switched to clocksource hpet
[ 0.399359] AppArmor: AppArmor Filesystem Enabled
[ 0.399420] pnp: PnP ACPI init
[ 0.399529] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.399532] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.399534] system 00:00: [io 0xffff] has been reserved
[ 0.399535] system 00:00: [io 0xffff] has been reserved
[ 0.399537] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 0.399539] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.399540] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.399542] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.399544] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 0.399547] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.399576] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.399620] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.399623] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.399650] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.399714] pnp 00:04: Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.450300] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.450303] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.450305] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.450306] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.450308] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.450310] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.450312] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.450313] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 0.450315] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.450317] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.450319] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.450321] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450624] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 0.450626] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 0.450629] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.450645] pnp: PnP ACPI: found 7 devices
[ 0.456954] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.456980] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.456982] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.456984] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.456987] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.456990] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.456993] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.456996] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.457001] pci 0000:00:1c.0: bridge window [mem 0xd3900000-0xd39fffff]
[ 0.457010] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.457015] pci 0000:00:1c.1: bridge window [mem 0xd3800000-0xd38fffff]
[ 0.457024] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.457026] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.457027] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.457029] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.457030] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.457032] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.457034] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.457035] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.457037] pci_bus 0000:02: resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.457038] pci_bus 0000:03: resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.457064] NET: Registered protocol family 2
[ 0.457233] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.457383] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.457498] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.457513] TCP: reno registered
[ 0.457524] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.457552] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.457606] NET: Registered protocol family 1
[ 0.457620] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.057331] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.656510] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.656702] pci 0000:02:00.0: set MSI_INTX_DISABLE_BUG flag
[ 3.656714] PCI: CLS 64 bytes, default 64
[ 3.656765] Trying to unpack rootfs image as initramfs...
[ 4.131719] Freeing initrd memory: 30032K (ffff880034548000 - ffff88003629c000)
[ 4.131771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.131774] software IO TLB [mem 0xb6abf000-0xbaabf000] (64MB) mapped at [ffff8800b6abf000-ffff8800baabefff]
[ 4.131810] Simple Boot Flag at 0x44 set to 0x1
[ 4.132078] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 4.132186] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132193] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132201] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132209] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132217] microcode: CPU4 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132224] microcode: CPU5 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132232] microcode: CPU6 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132240] microcode: CPU7 sig=0x306a9, pf=0x10, revision=0x15
[ 4.132302] microcode: Microcode Update Driver: v2.00 <
tigran@aivazian.fsnet.co.uk>;, Peter Oruba
[ 4.132328] Scanning for low memory corruption every 60 seconds
[ 4.132665] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 4.132688] Initialise system trusted keyring
[ 4.132711] audit: initializing netlink subsys (disabled)
[ 4.132725] audit: type=2000 audit(1452465341.112:1): initialized
[ 4.133093] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.134465] zpool: loaded
[ 4.134468] zbud: loaded
[ 4.134619] VFS: Disk quotas dquot_6.5.2
[ 4.134651] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.135068] fuse init (API version 7.23)
[ 4.135201] Key type big_key registered
[ 4.135566] Key type asymmetric registered
[ 4.135568] Asymmetric key parser 'x509' registered
[ 4.135601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.135647] io scheduler noop registered
[ 4.135650] io scheduler deadline registered (default)
[ 4.135678] io scheduler cfq registered
[ 4.136102] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.136119] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.136150] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 4.136151] vesafb: scrolling: redraw
[ 4.136152] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.141591] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004f00000, using 4160k, total 4160k
[ 4.141691] Console: switching to colour frame buffer device 170x48
[ 4.141708] fb0: VESA VGA frame buffer device
[ 4.141732] intel_idle: MWAIT substates: 0x21120
[ 4.141733] intel_idle: v0.4 model 0x3A
[ 4.141735] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.142108] ACPI: AC Adapter [ACAD] (on-line)
[ 4.142206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[ 4.142210] ACPI: Power Button [PWRB]
[ 4.142243] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input1
[ 4.142245] ACPI: Sleep Button [SLPB]
[ 4.142286] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 4.142305] ACPI: Lid Switch [LID0]
[ 4.142338] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.142340] ACPI: Power Button [PWRF]
[ 4.144972] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.144975] ACPI: Thermal Zone [TZ00] (52 C)
[ 4.145008] GHES: HEST is not enabled!
[ 4.145154] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.224269] ACPI: Battery Slot [BAT1] (battery present)
[ 4.224369] Linux agpgart interface v0.103
[ 4.225793] brd: module loaded
[ 4.226501] loop: module loaded
[ 4.226703] libphy: Fixed MDIO Bus: probed
[ 4.226706] tun: Universal TUN/TAP device driver, 1.6
[ 4.226707] tun: (C) 1999-2004 Max Krasnyansky <
maxk@qualcomm.com>;
[ 4.226752] PPP generic driver version 2.4.2
[ 4.226994] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.227001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 4.227095] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 4.227182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.227184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.227185] usb usb1: Product: xHCI Host Controller
[ 4.227187] usb usb1: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
[ 4.227188] usb usb1: SerialNumber: 0000:00:14.0
[ 4.227358] hub 1-0:1.0: USB hub found
[ 4.227371] hub 1-0:1.0: 4 ports detected
[ 4.227685] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 4.227688] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 4.227722] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 4.227724] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.227726] usb usb2: Product: xHCI Host Controller
[ 4.227727] usb usb2: Manufacturer: Linux 3.19.0-32-generic xhci-hcd
[ 4.227729] usb usb2: SerialNumber: 0000:00:14.0
[ 4.227889] hub 2-0:1.0: USB hub found
[ 4.227901] hub 2-0:1.0: 4 ports detected
[ 4.228230] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.228237] ehci-pci: EHCI PCI platform driver
[ 4.228328] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 4.228333] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.228347] ehci-pci 0000:00:1a.0: debug port 2
[ 4.232239] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 4.232254] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3a19000
[ 4.244220] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.244263] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.244265] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.244266] usb usb3: Product: EHCI Host Controller
[ 4.244268] usb usb3: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
[ 4.244269] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.244445] hub 3-0:1.0: USB hub found
[ 4.244454] hub 3-0:1.0: 2 ports detected
[ 4.244640] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 4.244645] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 4.244657] ehci-pci 0000:00:1d.0: debug port 2
[ 4.248557] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 4.248571] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3a18000
[ 4.260230] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.260290] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.260293] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.260294] usb usb4: Product: EHCI Host Controller
[ 4.260296] usb usb4: Manufacturer: Linux 3.19.0-32-generic ehci_hcd
[ 4.260297] usb usb4: SerialNumber: 0000:00:1d.0
[ 4.260475] hub 4-0:1.0: USB hub found
[ 4.260483] hub 4-0:1.0: 2 ports detected
[ 4.260581] ehci-platform: EHCI generic platform driver
[ 4.260590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.260595] ohci-pci: OHCI PCI platform driver
[ 4.260605] ohci-platform: OHCI generic platform driver
[ 4.260612] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.260661] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 4.279826] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.279830] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.280004] mousedev: PS/2 mouse device common for all mice
[ 4.281487] rtc_cmos 00:01: RTC can wake from S4
[ 4.281618] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 4.281646] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.281654] i2c /dev entries driver
[ 4.281716] device-mapper: uevent: version 1.0.3
[ 4.281810] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised:
dm-devel@redhat.com [ 4.281827] Intel P-state driver initializing.
[ 4.282117] Consider also installing thermald for improved thermal control.
[ 4.282122] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.282346] PCCT header not found.
[ 4.282347] ACPI PCC probe failed.
[ 4.282417] TCP: cubic registered
[ 4.282485] NET: Registered protocol family 10
[ 4.282705] NET: Registered protocol family 17
[ 4.282714] Key type dns_resolver registered
[ 4.283099] Loading compiled-in X.509 certificates
[ 4.283733] Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c'
[ 4.283746] registered taskstats version 1
[ 4.285676] Key type trusted registered
[ 4.289500] Key type encrypted registered
[ 4.289507] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.289510] ima: No TPM chip found, activating TPM-bypass!
[ 4.289524] evm: HMAC attrs: 0x1
[ 4.289970] Magic number: 0:85:603
[ 4.290084] rtc_cmos 00:01: setting system clock to 2016-01-10 22:35:42 UTC (1452465342)
[ 4.290199] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.290200] EDD information not available.
[ 4.290261] PM: Hibernation image not present or could not be loaded.
[ 4.290569] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000)
[ 4.290571] Write protecting the kernel read-only data: 12288k
[ 4.290900] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000)
[ 4.291002] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000)
[ 4.298280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.301863] systemd-udevd[149]: starting version 204
[ 4.337938] ahci 0000:00:1f.2: version 3.0
[ 4.338219] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.340081] [drm] Initialized drm 1.1.0 20060810
[ 4.346412] alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [dc:0e:a1:ff:a5:b1]
[ 4.347010] wmi: Mapper loaded
[ 4.352232] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 4.352237] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 4.360878] scsi host0: ahci
[ 4.361024] scsi host1: ahci
[ 4.361142] scsi host2: ahci
[ 4.361268] scsi host3: ahci
[ 4.361383] scsi host4: ahci
[ 4.361493] scsi host5: ahci
[ 4.361547] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 26
[ 4.361549] ata2: DUMMY
[ 4.361552] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 26
[ 4.361553] ata4: DUMMY
[ 4.361555] ata5: DUMMY
[ 4.361556] ata6: DUMMY
[ 4.365212] [drm] Memory usable by graphics device = 2048M
[ 4.365215] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 4.365216] fb: switching to inteldrmfb from VESA VGA
[ 4.365241] Console: switching to colour dummy device 80x25
[ 4.365299] [drm] Replacing VGA console driver
[ 4.367502] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 4.367531] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 4.367561] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 4.367652] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 4.367654] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 4.367682] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 4.388180] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.388181] [drm] Driver supports precise vblank timestamp query.
[ 4.388265] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.412555] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.412648] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 4.412714] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
[ 4.413433] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.413537] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
[ 4.413695] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0
[ 4.413941] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1480a1
[ 4.413943] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
[ 4.413944] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
[ 4.423937] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 4.424016] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 4.424018] nouveau [ VBIOS][0000:01:00.0] version 70.08.a8.00.9a
[ 4.425365] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 4.425375] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 4.429709] fbcon: inteldrmfb (fb0) is primary device
[ 4.429727] Console: switching to colour frame buffer device 170x48
[ 4.429741] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.429742] i915 0000:00:02.0: registered panic notifier
[ 4.532368] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 4.532394] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff880035f9f000] reclocking of this ram type unsupported
[ 4.532395] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 4.532396] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 4.532397] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 4.533726] nouveau [ VOLT][0000:01:00.0] GPU voltage: 912500uv
[ 4.536070] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 4.556051] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 4.562717] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 4.562729] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 4.562747] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 4.572046] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 4.582639] nouveau [ CLK][0000:01:00.0] 07: core 270 MHz memory 405 MHz
[ 4.582646] nouveau [ CLK][0000:01:00.0] 0f: core 475 MHz memory 900 MHz
[ 4.582811] nouveau [ CLK][0000:01:00.0] --: core 270 MHz memory 405 MHz
[ 4.585901] vga_switcheroo: enabled
[ 4.586042] [TTM] Zone kernel: Available graphics memory: 4020804 kiB
[ 4.586043] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.586044] [TTM] Initializing pool allocator
[ 4.586047] [TTM] Initializing DMA pool allocator
[ 4.586063] nouveau [ DRM] VRAM: 1024 MiB
[ 4.586064] nouveau [ DRM] GART: 1048576 MiB
[ 4.586067] nouveau [ DRM] TMDS table version 2.0
[ 4.586068] nouveau [ DRM] DCB version 4.0
[ 4.586069] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 4.586070] nouveau [ DRM] DCB conn 00: 00000000
[ 4.586561] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.586562] [drm] Driver supports precise vblank timestamp query.
[ 4.591712] nouveau [ DRM] MM: using COPY0 for buffer copies
[ 4.632429] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff880231b6f800
[ 4.632518] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 4.632528] [drm] Initialized nouveau 1.2.1 20120801 for 0000:01:00.0 on minor 1
[ 4.664434] usb 1-4: New USB device found, idVendor=0781, idProduct=5567
[ 4.664437] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.664438] usb 1-4: Product: Cruzer Blade
[ 4.664439] usb 1-4: Manufacturer: SanDisk
[ 4.664441] usb 1-4: SerialNumber: 4C530799960627113530
[ 4.667040] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 4.667150] scsi host6: usb-storage 1-4:1.0
[ 4.667207] usbcore: registered new interface driver usb-storage
[ 4.668361] usbcore: registered new interface driver uas
[ 4.680004] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.686271] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[ 4.686274] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.688341] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.688343] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.688589] hub 3-1:1.0: USB hub found
[ 4.688735] hub 3-1:1.0: 6 ports detected
[ 4.692626] ata1.00: configured for UDMA/100
[ 4.692851] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 4.693235] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 4.693237] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.693257] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.693464] sd 0:0:0:0: [sda] Write Protect is off
[ 4.693466] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.693580] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.704705] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 4.704708] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.705022] hub 4-1:1.0: USB hub found
[ 4.705276] hub 4-1:1.0: 6 ports detected
[ 4.775857] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 4.777339] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.959941] usb 3-1.2: new full-speed USB device number 3 using ehci-pci
[ 4.975909] usb 4-1.6: new high-speed USB device number 3 using ehci-pci
[ 5.011923] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.015085] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 5.016083] ata3.00: configured for UDMA/100
[ 5.024164] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 5.049901] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.049908] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.050145] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 5.050332] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 5.054123] usb 3-1.2: New USB device found, idVendor=062a, idProduct=4102
[ 5.054126] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.054127] usb 3-1.2: Product: 2.4G Wireless Mouse
[ 5.054128] usb 3-1.2: Manufacturer: MOSART Semi.
[ 5.056792] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.059345] usbcore: registered new interface driver usbhid
[ 5.059346] usbhid: USB HID core driver
[ 5.060533] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:062A:4102.0001/input/input11
[ 5.060690] hid-generic 0003:062A:4102.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1a.0-1.2/input0
[ 5.083552] usb 4-1.6: New USB device found, idVendor=04f2, idProduct=b2e2
[ 5.083556] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.083557] usb 4-1.6: Product: Lenovo EasyCamera
[ 5.083558] usb 4-1.6: Manufacturer: Chicony Corp.
[ 5.123778] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 5.131979] tsc: Refined TSC clocksource calibration: 2294.787 MHz
[ 5.220877] usb 3-1.3: New USB device found, idVendor=0cf3, idProduct=3002
[ 5.220885] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.424740] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 5.452846] psmouse serio1: elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 5.576940] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input8
[ 5.663833] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
[ 5.664146] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 5.664355] sd 6:0:0:0: [sdb] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
[ 5.664631] sd 6:0:0:0: [sdb] Write Protect is off
[ 5.664635] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 5.664886] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.666453] sdb: sdb1 sdb2
[ 5.667558] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 5.773007] random: nonblocking pool is initialized
[ 6.131621] Switched to clocksource tsc
[ 6.290573] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 6.290604] [drm:intel_pch_fifo_underrun_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 6.968672] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 9.785468] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 9.785576] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 9.785580] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 15.323088] Adding 4095996k swap on /dev/sda3. Priority:-1 extents:1 across:4095996k FS
[ 15.486730] systemd-udevd[444]: starting version 204
[ 15.581838] lp: driver loaded but no devices found
[ 15.585997] ppdev: user-space parallel port driver
[ 15.634503] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.669227] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input12
[ 15.689751] cfg80211: Calling CRDA to update world regulatory domain
[ 15.702384] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258)
[ 15.702392] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.702411] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.702415] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
[ 15.702419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.702421] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.702424] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
[ 15.702428] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.702429] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258)
[ 15.702433] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258)
[ 15.702437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.702438] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.705634] Bluetooth: Core ver 2.20
[ 15.705647] NET: Registered protocol family 31
[ 15.705648] Bluetooth: HCI device and connection manager initialized
[ 15.705652] Bluetooth: HCI socket layer initialized
[ 15.705655] Bluetooth: L2CAP socket layer initialized
[ 15.705660] Bluetooth: SCO socket layer initialized
[ 15.707423] usbcore: registered new interface driver btusb
[ 15.736353] AVX version of gcm_enc/dec engaged.
[ 15.736356] AES CTR mode by8 optimization enabled
[ 15.772895] ath: phy0: ASPM enabled: 0x42
[ 15.772900] ath: EEPROM regdomain: 0x65
[ 15.772901] ath: EEPROM indicates we should expect a direct regpair map
[ 15.772904] ath: Country alpha2 being used: 00
[ 15.772905] ath: Regpair used: 0x65
[ 15.783642] intel_rapl: Found RAPL domain package
[ 15.783645] intel_rapl: Found RAPL domain core
[ 15.783647] intel_rapl: Found RAPL domain uncore
[ 15.786967] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.787204] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005380000, irq=17
[ 15.790610] device-mapper: multipath: version 1.7.0 loaded
[ 15.822294] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[ 15.822727] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 15.822729] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.822730] sound hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 15.822732] sound hdaudioC0D0: mono: mono_out=0x0
[ 15.822732] sound hdaudioC0D0: inputs:
[ 15.822734] sound hdaudioC0D0: Internal Mic=0x1b
[ 15.822735] sound hdaudioC0D0: Mic=0x1a
[ 15.823560] sound hdaudioC0D0: Enable sync_write for stable communication
[ 15.828642] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.828718] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.828805] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 15.970729] cfg80211: World regulatory domain updated:
[ 15.970731] cfg80211: DFS Master region: unset
[ 15.970732] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.970734] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 15.970735] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 15.970736] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 15.970737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 15.970738] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 16.107498] media: Linux media interface: v0.10
[ 16.111748] Linux video capture interface: v2.00
[ 16.117982] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 16.119701] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input16
[ 16.119768] usbcore: registered new interface driver uvcvideo
[ 16.119770] USB Video Class driver (1.1.1)
[ 17.128799] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 17.464206] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
[ 17.479589] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 17.568863] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 18.045541] init: failsafe main process (811) killed by TERM signal
[ 18.639100] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.639102] Bluetooth: BNEP filters: protocol multicast
[ 18.639105] Bluetooth: BNEP socket layer initialized
[ 18.639756] Bluetooth: RFCOMM TTY layer initialized
[ 18.639761] Bluetooth: RFCOMM socket layer initialized
[ 18.639765] Bluetooth: RFCOMM ver 1.11
[ 19.138481] init: cups main process (894) killed by HUP signal
[ 19.138489] init: cups main process ended, respawning
[ 21.031635] usb 1-4: USB disconnect, device number 2
[ 21.044851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.074350] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.074694] Bluetooth: Can't change to loading configuration err
[ 21.074715] ath3k: probe of 3-1.3:1.0 failed with error -110
[ 21.074762] usbcore: registered new interface driver ath3k
[ 21.185171] init: samba-ad-dc main process (1218) terminated with status 1
[ 22.126319] wlan0: authenticate with d4:bf:7f:50:85:0d
[ 22.140228] wlan0: send auth to d4:bf:7f:50:85:0d (try 1/3)
[ 22.141917] wlan0: authenticated
[ 22.143054] wlan0: associate with d4:bf:7f:50:85:0d (try 1/3)
[ 22.149750] wlan0: RX AssocResp from d4:bf:7f:50:85:0d (capab=0x411 status=0 aid=2)
[ 22.149870] wlan0: associated
[ 22.149882] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.928732] init: plymouth-upstart-bridge main process ended, respawning
[ 23.931909] init: plymouth-upstart-bridge main process (1533) terminated with status 1
[ 23.931917] init: plymouth-upstart-bridge main process ended, respawning
[ 33.021562] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 33.021673] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[ 33.021677] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[ 257.616401] wlan0: deauthenticating from d4:bf:7f:50:85:0d by local choice (Reason: 3=DEAUTH_LEAVING)
[ 257.639186] cfg80211: Calling CRDA to update world regulatory domain
[ 257.643287] cfg80211: World regulatory domain updated:
[ 257.643293] cfg80211: DFS Master region: unset
[ 257.643295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 257.643300] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 257.643303] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 257.643305] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 257.643308] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 257.643310] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[ 267.532817] alx 0000:02:00.0 eth0: NIC Up: 100 Mbps Full
[ 267.533434] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
