Linux 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde XT [Radeon HD 7770 GHz Edition] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Device e252
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at d000 [size=256]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [270] #19

[ 10.731]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 10.731] X Protocol Version 11, Revision 0
[ 10.731] Build Operating System: Linux 3.2.0-37-generic x86_64 Ubuntu
[ 10.731] Current Operating System: Linux aspirant 3.11.0-12-generic #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 x86_64
[ 10.731] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.0-12-generic root=UUID=795f8dcd-f13f-4bd6-9992-5b377ce40fbc ro locale=ru_RU nomodeset quiet splash vt.handoff=7
[ 10.731] Build Date: 15 October 2013 09:23:37AM
[ 10.731] xorg-server 2:1.14.3-3ubuntu2 (For technical support please see http://www.ubuntu.com/support)
[ 10.731] Current version of pixman: 0.30.2
[ 10.731] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.731] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.731] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 16 20:40:35 2014
[ 10.731] (==) Using config file: "/etc/X11/xorg.conf"
[ 10.731] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 10.732] (==) ServerLayout "aticonfig Layout"
[ 10.732] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 10.732] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 10.732] (**) | |-->Device "aticonfig-Device[0]-0"
[ 10.732] (==) Automatically adding devices
[ 10.732] (==) Automatically enabling devices
[ 10.732] (==) Automatically adding GPU devices
[ 10.732] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 10.732] Entry deleted from font path.
[ 10.732] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 10.732] Entry deleted from font path.
[ 10.732] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 10.732] Entry deleted from font path.
[ 10.732] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 10.732] Entry deleted from font path.
[ 10.732] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 10.732] Entry deleted from font path.
[ 10.732] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 10.732] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 10.732] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.732] (II) Loader magic: 0x7fbf1ebbad20
[ 10.732] (II) Module ABI versions:
[ 10.732] X.Org ANSI C Emulation: 0.4
[ 10.732] X.Org Video Driver: 14.1
[ 10.732] X.Org XInput driver : 19.1
[ 10.732] X.Org Server Extension : 7.0
[ 10.733] (--) PCI:*(0:1:0:0) 1002:683d:174b:e252 rev 0, Mem @ 0xd0000000/268435456, 0xfeac0000/262144, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 10.733] (II) Open ACPI successful (/var/run/acpid.socket)
[ 10.733] Initializing built-in extension Generic Event Extension
[ 10.733] Initializing built-in extension SHAPE
[ 10.733] Initializing built-in extension MIT-SHM
[ 10.733] Initializing built-in extension XInputExtension
[ 10.733] Initializing built-in extension XTEST
[ 10.733] Initializing built-in extension BIG-REQUESTS
[ 10.733] Initializing built-in extension SYNC
[ 10.733] Initializing built-in extension XKEYBOARD
[ 10.733] Initializing built-in extension XC-MISC
[ 10.733] Initializing built-in extension SECURITY
[ 10.733] Initializing built-in extension XINERAMA
[ 10.733] Initializing built-in extension XFIXES
[ 10.733] Initializing built-in extension RENDER
[ 10.733] Initializing built-in extension RANDR
[ 10.733] Initializing built-in extension COMPOSITE
[ 10.733] Initializing built-in extension DAMAGE
[ 10.733] Initializing built-in extension MIT-SCREEN-SAVER
[ 10.733] Initializing built-in extension DOUBLE-BUFFER
[ 10.733] Initializing built-in extension RECORD
[ 10.733] Initializing built-in extension DPMS
[ 10.733] Initializing built-in extension X-Resource
[ 10.733] Initializing built-in extension XVideo
[ 10.733] Initializing built-in extension XVideo-MotionCompensation
[ 10.733] Initializing built-in extension SELinux
[ 10.733] Initializing built-in extension XFree86-VidModeExtension
[ 10.733] Initializing built-in extension XFree86-DGA
[ 10.733] Initializing built-in extension XFree86-DRI
[ 10.733] Initializing built-in extension DRI2
[ 10.733] (II) "glx" will be loaded by default.
[ 10.733] (WW) "xmir" is not to be loaded by default. Skipping.
[ 10.733] (II) LoadModule: "glx"
[ 10.734] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 10.734] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 10.734] compiled for 6.9.0, module version = 1.0.0
[ 10.734] Loading extension GLX
[ 10.734] (II) LoadModule: "fglrx"
[ 10.734] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 10.750] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 10.750] compiled for 1.4.99.906, module version = 14.20.7
[ 10.750] Module class: X.Org Video Driver
[ 10.750] (II) Loading sub module "fglrxdrm"
[ 10.750] (II) LoadModule: "fglrxdrm"
[ 10.750] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 10.750] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 10.750] compiled for 1.4.99.906, module version = 14.20.7
[ 10.750] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[ 10.750] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.20
[ 10.750] (II) AMD Proprietary Linux Driver Build Date: May 22 2014 21:17:03
[ 10.750] (++) using VT number 8

[ 10.753] (WW) Falling back to old probe method for fglrx
[ 10.760] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 10.761] ukiDynamicMajor: found major device number 251
[ 10.761] ukiDynamicMajor: found major device number 251
[ 10.761] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.761] ukiOpenDevice: node name is /dev/ati/card0
[ 10.761] ukiOpenDevice: open result is 10, (OK)
[ 10.761] ukiOpenByBusid: ukiOpenMinor returns 10
[ 10.761] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.794] (--) Chipset Supported AMD Graphics Processor (0x683D) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
[ 10.794] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 10.794] (II) fglrx(0): pEnt->device->identifier=0x7fbf1ff951b0
[ 10.794] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 10.794] (II) Loading sub module "vgahw"
[ 10.794] (II) LoadModule: "vgahw"
[ 10.794] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 10.794] (II) Module vgahw: vendor="X.Org Foundation"
[ 10.794] compiled for 1.14.3, module version = 0.1.0
[ 10.794] ABI class: X.Org Video Driver, version 14.1
[ 10.795] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 10.795] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 10.795] (==) fglrx(0): Default visual is TrueColor
[ 10.795] (**) fglrx(0): Option "DPMS" "true"
[ 10.795] (==) fglrx(0): RGB weight 888
[ 10.795] (II) fglrx(0): Using 8 bits per RGB
[ 10.795] (==) fglrx(0): Buffer Tiling is ON
[ 10.795] (II) Loading sub module "fglrxdrm"
[ 10.795] (II) LoadModule: "fglrxdrm"
[ 10.795] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 10.795] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 10.795] compiled for 1.4.99.906, module version = 14.20.7
[ 10.796] ukiDynamicMajor: found major device number 251
[ 10.796] ukiDynamicMajor: found major device number 251
[ 10.796] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.796] ukiOpenDevice: node name is /dev/ati/card0
[ 10.796] ukiOpenDevice: open result is 12, (OK)
[ 10.796] ukiOpenByBusid: ukiOpenMinor returns 12
[ 10.796] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.796] (**) fglrx(0): NoAccel = NO
[ 10.796] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 10.796] (--) fglrx(0): Chipset: "AMD Radeon R7 200 Series " (Chipset = 0x683d)
[ 10.796] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe252)
[ 10.796] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 10.796] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 10.796] (--) fglrx(0): MMIO registers at 0xfeac0000
[ 10.796] (--) fglrx(0): I/O port at 0x0000d000
[ 10.796] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 10.797] (II) fglrx(0): AC Adapter is used
[ 10.802] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 10.802] (II) Loading sub module "vbe"
[ 10.802] (II) LoadModule: "vbe"
[ 10.802] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 10.802] (II) Module vbe: vendor="X.Org Foundation"
[ 10.802] compiled for 1.14.3, module version = 1.1.0
[ 10.802] ABI class: X.Org Video Driver, version 14.1
[ 10.803] (II) fglrx(0): VESA BIOS detected
[ 10.803] (II) fglrx(0): VESA VBE Version 3.0
[ 10.803] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 10.803] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 10.803] (II) fglrx(0): VESA VBE OEM Software Rev: 15.33
[ 10.803] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 10.803] (II) fglrx(0): VESA VBE OEM Product: VERDE
[ 10.803] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 10.803] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 10.803] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 10.803] (II) fglrx(0): PCIE card detected
[ 10.803] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 10.803] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 10.803] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0x40000000)
[ 10.803] (II) fglrx(0): RandR 1.2 support is enabled!
[ 10.803] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 10.803] (II) Loading sub module "fb"
[ 10.803] (II) LoadModule: "fb"
[ 10.803] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 10.803] (II) Module fb: vendor="X.Org Foundation"
[ 10.803] compiled for 1.14.3, module version = 1.0.0
[ 10.803] ABI class: X.Org ANSI C Emulation, version 0.4
[ 10.803] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 10.803] (II) Loading sub module "ddc"
[ 10.803] (II) LoadModule: "ddc"
[ 10.803] (II) Module "ddc" already built-in
[ 10.914] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 10.914] (II) fglrx(0): Output DFP2 has no monitor section
[ 10.914] (II) fglrx(0): Output DFP3 has no monitor section
[ 10.914] (II) fglrx(0): Output DFP4 has no monitor section
[ 10.914] (II) fglrx(0): Output DFP5 has no monitor section
[ 10.914] (II) fglrx(0): Output DFP6 has no monitor section
[ 10.914] (II) fglrx(0): Output CRT1 has no monitor section
[ 10.914] (II) Loading sub module "ddc"
[ 10.914] (II) LoadModule: "ddc"
[ 10.914] (II) Module "ddc" already built-in
[ 10.914] (II) fglrx(0): Connected Display0: DFP6
[ 10.914] (II) fglrx(0): Display0 EDID data ---------------------------
[ 10.914] (II) fglrx(0): Manufacturer: SAM Model: 168 Serial#: 1296707895
[ 10.914] (II) fglrx(0): Year: 2006 Week: 33
[ 10.914] (II) fglrx(0): EDID Version: 1.3
[ 10.914] (II) fglrx(0): Digital Display Input
[ 10.914] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 10.914] (II) fglrx(0): Gamma: 2.20
[ 10.914] (II) fglrx(0): DPMS capabilities: Off
[ 10.914] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10.914] (II) fglrx(0): First detailed timing is preferred mode
[ 10.914] (II) fglrx(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
[ 10.914] (II) fglrx(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 10.914] (II) fglrx(0): Supported established timings:
[ 10.914] (II) fglrx(0): 720x400@70Hz
[ 10.915] (II) fglrx(0): 640x480@60Hz
[ 10.915] (II) fglrx(0): 640x480@67Hz
[ 10.915] (II) fglrx(0): 640x480@72Hz
[ 10.915] (II) fglrx(0): 640x480@75Hz
[ 10.915] (II) fglrx(0): 800x600@56Hz
[ 10.915] (II) fglrx(0): 800x600@60Hz
[ 10.915] (II) fglrx(0): 800x600@72Hz
[ 10.915] (II) fglrx(0): 800x600@75Hz
[ 10.915] (II) fglrx(0): 832x624@75Hz
[ 10.915] (II) fglrx(0): 1024x768@60Hz
[ 10.915] (II) fglrx(0): 1024x768@70Hz
[ 10.915] (II) fglrx(0): 1024x768@75Hz
[ 10.915] (II) fglrx(0): 1280x1024@75Hz
[ 10.915] (II) fglrx(0): 1152x864@75Hz
[ 10.915] (II) fglrx(0): Manufacturer's mask: 0
[ 10.915] (II) fglrx(0): Supported standard timings:
[ 10.915] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.915] (II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 10.915] (II) fglrx(0): Supported detailed timing:
[ 10.915] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 10.915] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 10.915] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 10.915] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 10.915] (II) fglrx(0): Monitor name: SyncMaster
[ 10.915] (II) fglrx(0): Serial No: H9NL824717
[ 10.915] (II) fglrx(0): EDID (in hex):
[ 10.915] (II) fglrx(0): 00ffffffffffff004c2d680137314a4d
[ 10.915] (II) fglrx(0): 2110010380221b782aaaa5a654549926
[ 10.915] (II) fglrx(0): 145054bfef808180714f010101010101
[ 10.915] (II) fglrx(0): 010101010101302a009851002a403070
[ 10.915] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[ 10.915] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 10.915] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 10.915] (II) fglrx(0): 0048394e4c3832343731370a202000dc
[ 10.915] (II) fglrx(0): End of Display0 EDID data --------------------
[ 10.915] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 10.915] (II) fglrx(0): EDID for output DFP1
[ 10.915] (II) fglrx(0): EDID for output DFP2
[ 10.915] (II) fglrx(0): EDID for output DFP3
[ 10.915] (II) fglrx(0): EDID for output DFP4
[ 10.915] (II) fglrx(0): EDID for output DFP5
[ 10.915] (II) fglrx(0): EDID for output DFP6
[ 10.915] (II) fglrx(0): Manufacturer: SAM Model: 168 Serial#: 1296707895
[ 10.915] (II) fglrx(0): Year: 2006 Week: 33
[ 10.915] (II) fglrx(0): EDID Version: 1.3
[ 10.915] (II) fglrx(0): Digital Display Input
[ 10.915] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 27
[ 10.915] (II) fglrx(0): Gamma: 2.20
[ 10.915] (II) fglrx(0): DPMS capabilities: Off
[ 10.915] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 10.915] (II) fglrx(0): First detailed timing is preferred mode
[ 10.915] (II) fglrx(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600
[ 10.915] (II) fglrx(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329
[ 10.915] (II) fglrx(0): Supported established timings:
[ 10.915] (II) fglrx(0): 720x400@70Hz
[ 10.915] (II) fglrx(0): 640x480@60Hz
[ 10.915] (II) fglrx(0): 640x480@67Hz
[ 10.915] (II) fglrx(0): 640x480@72Hz
[ 10.915] (II) fglrx(0): 640x480@75Hz
[ 10.915] (II) fglrx(0): 800x600@56Hz
[ 10.915] (II) fglrx(0): 800x600@60Hz
[ 10.915] (II) fglrx(0): 800x600@72Hz
[ 10.915] (II) fglrx(0): 800x600@75Hz
[ 10.915] (II) fglrx(0): 832x624@75Hz
[ 10.915] (II) fglrx(0): 1024x768@60Hz
[ 10.915] (II) fglrx(0): 1024x768@70Hz
[ 10.916] (II) fglrx(0): 1024x768@75Hz
[ 10.916] (II) fglrx(0): 1280x1024@75Hz
[ 10.916] (II) fglrx(0): 1152x864@75Hz
[ 10.916] (II) fglrx(0): Manufacturer's mask: 0
[ 10.916] (II) fglrx(0): Supported standard timings:
[ 10.916] (II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 10.916] (II) fglrx(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 10.916] (II) fglrx(0): Supported detailed timing:
[ 10.916] (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
[ 10.916] (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 10.916] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 10.916] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 10.916] (II) fglrx(0): Monitor name: SyncMaster
[ 10.916] (II) fglrx(0): Serial No: H9NL824717
[ 10.916] (II) fglrx(0): EDID (in hex):
[ 10.916] (II) fglrx(0): 00ffffffffffff004c2d680137314a4d
[ 10.916] (II) fglrx(0): 2110010380221b782aaaa5a654549926
[ 10.916] (II) fglrx(0): 145054bfef808180714f010101010101
[ 10.916] (II) fglrx(0): 010101010101302a009851002a403070
[ 10.916] (II) fglrx(0): 1300520e1100001e000000fd00384b1e
[ 10.916] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 10.916] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 10.916] (II) fglrx(0): 0048394e4c3832343731370a202000dc
[ 10.916] (II) fglrx(0): Printing probed modes for output DFP6
[ 10.916] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[ 10.916] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1152x864"x60.0 108.00 1152 1328 1440 1688 864 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 10.916] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 10.916] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 10.916] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 10.916] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 10.916] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 10.916] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 10.916] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 -hsync -vsync (37.9 kHz e)
[ 10.916] (II) fglrx(0): Modeline "640x480"x67.0 26.75 640 656 720 800 480 483 487 502 -hsync +vsync (33.4 kHz e)
[ 10.916] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 10.916] (II) fglrx(0): EDID for output CRT1
[ 10.916] (II) fglrx(0): Output DFP1 disconnected
[ 10.916] (II) fglrx(0): Output DFP2 disconnected
[ 10.916] (II) fglrx(0): Output DFP3 disconnected
[ 10.916] (II) fglrx(0): Output DFP4 disconnected
[ 10.916] (II) fglrx(0): Output DFP5 disconnected
[ 10.916] (II) fglrx(0): Output DFP6 connected
[ 10.916] (II) fglrx(0): Output CRT1 disconnected
[ 10.916] (II) fglrx(0): Using exact sizes for initial modes
[ 10.916] (II) fglrx(0): Output DFP6 using initial mode 1280x1024
[ 10.916] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 10.916] (II) fglrx(0): DPI set to (96, 96)
[ 10.916] (II) fglrx(0): Eyefinity capable adapter detected.
[ 10.916] (II) fglrx(0): Adapter AMD Radeon R7 200 Series has 6 configurable heads and 1 displays connected.
[ 10.916] (==) fglrx(0): PseudoColor visuals disabled
[ 10.916] (II) Loading sub module "ramdac"
[ 10.916] (II) LoadModule: "ramdac"
[ 10.916] (II) Module "ramdac" already built-in
[ 10.916] (==) fglrx(0): NoDRI = NO
[ 10.916] (==) fglrx(0): Capabilities: 0x00000000
[ 10.916] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 10.916] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 10.916] (==) fglrx(0): UseFastTLS=0
[ 10.916] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 10.916] (--) Depth 24 pixmap format is 32 bpp
[ 10.919] Loading extension ATIFGLRXDRI
[ 10.919] (II) fglrx(0): doing swlDriScreenInit
[ 10.919] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 10.919] ukiDynamicMajor: found major device number 251
[ 10.919] ukiDynamicMajor: found major device number 251
[ 10.919] ukiDynamicMajor: found major device number 251
[ 10.919] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 10.919] ukiOpenDevice: node name is /dev/ati/card0
[ 10.919] ukiOpenDevice: open result is 13, (OK)
[ 10.919] ukiOpenByBusid: ukiOpenMinor returns 13
[ 10.919] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 10.919] (II) fglrx(0): [uki] DRM interface version 1.0
[ 10.919] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 10.919] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x72000
[ 10.919] (II) fglrx(0): [uki] mapped SAREA 0x72000 to 0x7fbf1e5a2000
[ 10.919] (II) fglrx(0): [uki] framebuffer handle = 0x73000
[ 10.919] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 10.919] (II) fglrx(0): swlDriScreenInit done
[ 10.919] (II) fglrx(0): Kernel Module Version Information:
[ 10.919] (II) fglrx(0): Name: fglrx
[ 10.919] (II) fglrx(0): Version: 14.20.7
[ 10.919] (II) fglrx(0): Date: May 22 2014
[ 10.919] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 10.919] (II) fglrx(0): Kernel Module version matches driver.
[ 10.919] (II) fglrx(0): Kernel Module Build Time Information:
[ 10.919] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.0-12-generic
[ 10.919] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 10.919] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 10.919] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 10.920] (II) fglrx(0): [uki] register handle = 0x00074000
[ 10.920] (II) fglrx(0): DRI initialization successfull
[ 10.920] (II) fglrx(0): FBADPhys: 0xf400000000 FBMappedSize: 0x01040000
[ 10.920] (==) fglrx(0): Backing store disabled
[ 10.920] Loading extension FGLRXEXTENSION
[ 10.920] (**) fglrx(0): DPMS enabled
[ 10.920] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 10.920] (**) fglrx(0): Textured Video is enabled.
[ 10.920] (II) LoadModule: "glesx"
[ 10.921] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 10.921] (II) Module glesx: vendor="X.Org Foundation"
[ 10.921] compiled for 1.4.99.906, module version = 1.0.0
[ 10.921] Loading extension GLESX
[ 10.921] (II) fglrx(0): GLESX enableFlags = 8784
[ 10.921] (II) fglrx(0): GLESX is enabled
[ 10.921] (II) LoadModule: "amdxmm"
[ 10.921] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 10.921] (II) Module amdxmm: vendor="X.Org Foundation"
[ 10.921] compiled for 1.4.99.906, module version = 2.0.0
[ 10.938] Loading extension AMDXVOPL
[ 10.938] Loading extension AMDXVBA
[ 10.939] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 10.940] (II) fglrx(0): Enable composite support successfully
[ 10.940] (WW) fglrx(0): Option "VendorName" is not used
[ 10.940] (WW) fglrx(0): Option "ModelName" is not used
[ 10.940] (II) fglrx(0): X context handle = 0x2
[ 10.940] (II) fglrx(0): [DRI] installation complete
[ 10.940] (==) fglrx(0): Silken mouse enabled
[ 10.940] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 10.941] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.219] (--) RandR disabled
[ 11.222] (II) SELinux: Disabled on system
[ 11.223] ukiDynamicMajor: found major device number 251
[ 11.223] ukiDynamicMajor: found major device number 251
[ 11.223] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 11.223] ukiOpenDevice: node name is /dev/ati/card0
[ 11.223] ukiOpenDevice: open result is 14, (OK)
[ 11.223] ukiOpenByBusid: ukiOpenMinor returns 14
[ 11.223] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 11.225] ukiDynamicMajor: found major device number 251
[ 11.225] ukiDynamicMajor: found major device number 251
[ 11.225] ukiDynamicMajor: found major device number 251
[ 11.225] ukiOpenDevice: node name is /dev/ati/card0
[ 11.225] ukiOpenDevice: open result is 15, (OK)
[ 11.225] ukiGetBusid returned 'PCI:1:0:0'
[ 11.225] ukiOpenDevice: node name is /dev/ati/card1
[ 11.225] ukiOpenDevice: open result is -1, (No such device)
[ 11.225] ukiOpenDevice: open result is -1, (No such device)
[ 11.225] ukiOpenDevice: Open failed
[ 11.225] ukiOpenDevice: node name is /dev/ati/card2
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card3
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card4
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card5
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card6
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card7
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card8
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card9
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card10
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card11
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card12
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card13
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card14
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiOpenDevice: node name is /dev/ati/card15
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: open result is -1, (No such device)
[ 11.226] ukiOpenDevice: Open failed
[ 11.226] ukiDynamicMajor: found major device number 251
[ 11.226] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 11.226] ukiOpenDevice: node name is /dev/ati/card0
[ 11.226] ukiOpenDevice: open result is 15, (OK)
[ 11.226] ukiOpenByBusid: ukiOpenMinor returns 15
[ 11.226] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 11.256] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 11.256] ukiDynamicMajor: found major device number 251
[ 11.256] ukiDynamicMajor: found major device number 251
[ 11.256] ukiDynamicMajor: found major device number 251
[ 11.256] ukiOpenDevice: node name is /dev/ati/card0
[ 11.256] ukiOpenDevice: open result is 16, (OK)
[ 11.256] ukiGetBusid returned 'PCI:1:0:0'
[ 11.256] ukiOpenDevice: node name is /dev/ati/card1
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: Open failed
[ 11.256] ukiOpenDevice: node name is /dev/ati/card2
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: Open failed
[ 11.256] ukiOpenDevice: node name is /dev/ati/card3
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: Open failed
[ 11.256] ukiOpenDevice: node name is /dev/ati/card4
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: Open failed
[ 11.256] ukiOpenDevice: node name is /dev/ati/card5
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.256] ukiOpenDevice: Open failed
[ 11.256] ukiOpenDevice: node name is /dev/ati/card6
[ 11.256] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card7
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card8
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card9
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card10
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card11
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card12
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card13
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card14
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiOpenDevice: node name is /dev/ati/card15
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: open result is -1, (No such device)
[ 11.257] ukiOpenDevice: Open failed
[ 11.257] ukiDynamicMajor: found major device number 251
[ 11.257] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 11.257] ukiOpenDevice: node name is /dev/ati/card0
[ 11.257] ukiOpenDevice: open result is 16, (OK)
[ 11.257] ukiOpenByBusid: ukiOpenMinor returns 16
[ 11.257] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 11.266] (II) fglrx(0): OverDrive5 Detected!
[ 11.268] (II) fglrx(0): Setting screen physical size to 338 x 270
[ 11.274] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 11.276] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 11.276] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.276] (II) LoadModule: "evdev"
[ 11.276] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 11.276] (II) Module evdev: vendor="X.Org Foundation"
[ 11.276] compiled for 1.14.1, module version = 2.7.3
[ 11.276] Module class: X.Org XInput Driver
[ 11.276] ABI class: X.Org XInput driver, version 19.1
[ 11.276] (II) Using input driver 'evdev' for 'Power Button'
[ 11.276] (**) Power Button: always reports core events
[ 11.276] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 11.277] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.277] (--) evdev: Power Button: Found keys
[ 11.277] (II) evdev: Power Button: Configuring as keyboard
[ 11.277] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 11.277] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 11.277] (**) Option "xkb_rules" "evdev"
[ 11.277] (**) Option "xkb_model" "pc105"
[ 11.277] (**) Option "xkb_layout" "us,ru"
[ 11.277] (**) Option "xkb_variant" ","
[ 11.277] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 11.278] (II) XKB: reuse xkmfile /var/lib/xkb/server-5BD46092C922CD443B4EABE4B26B5EFCDED629BD.xkm
[ 11.278] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 11.278] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 11.278] (II) Using input driver 'evdev' for 'Power Button'
[ 11.278] (**) Power Button: always reports core events
[ 11.278] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 11.278] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 11.278] (--) evdev: Power Button: Found keys
[ 11.278] (II) evdev: Power Button: Configuring as keyboard
[ 11.278] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 11.278] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 11.278] (**) Option "xkb_rules" "evdev"
[ 11.278] (**) Option "xkb_model" "pc105"
[ 11.278] (**) Option "xkb_layout" "us,ru"
[ 11.278] (**) Option "xkb_variant" ","
[ 11.278] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=11 (/dev/input/event11)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=10 (/dev/input/event12)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=9 (/dev/input/event13)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.279] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event16)
[ 11.279] (II) No input driver specified, ignoring this device.
[ 11.279] (II) This device may have been added with another device file.
[ 11.280] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event17)
[ 11.280] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 11.280] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 11.280] (**) USB Optical Mouse: always reports core events
[ 11.280] (**) evdev: USB Optical Mouse: Device: "/dev/input/event17"
[ 11.280] (--) evdev: USB Optical Mouse: Vendor 0x1bcf Product 0x5
[ 11.280] (--) evdev: USB Optical Mouse: Found 9 mouse buttons
[ 11.280] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 11.280] (--) evdev: USB Optical Mouse: Found relative axes
[ 11.280] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 11.280] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 11.280] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 11.280] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 11.280] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11.280] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/input/input17/event17"
[ 11.280] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[ 11.280] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 11.280] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 11.280] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 11.280] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 11.280] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 11.280] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 11.280] (II) No input driver specified, ignoring this device.
[ 11.280] (II) This device may have been added with another device file.
[ 11.280] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
[ 11.280] (II) No input driver specified, ignoring this device.
[ 11.280] (II) This device may have been added with another device file.
[ 11.280] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event3)
[ 11.280] (II) No input driver specified, ignoring this device.
[ 11.280] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event4)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event5)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event6)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event7)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event8)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event9)
[ 11.281] (II) No input driver specified, ignoring this device.
[ 11.281] (II) This device may have been added with another device file.
[ 11.281] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 11.281] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 11.281] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 11.281] (**) AT Translated Set 2 keyboard: always reports core events
[ 11.281] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 11.281] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 11.281] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 11.281] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 11.281] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 11.281] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 11.282] (**) Option "xkb_rules" "evdev"
[ 11.282] (**) Option "xkb_model" "pc105"
[ 11.282] (**) Option "xkb_layout" "us,ru"
[ 11.282] (**) Option "xkb_variant" ","
[ 11.282] (**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
[ 11.286] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 14.080] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 14.080] (II) fglrx(0): Backup framebuffer data.
[ 14.092] (II) fglrx(0): Backup complete.

cd /usr/local/bin && wget -Nc smxi.org/sgfxi && chmod +x sgfxi && sgfxi

Linux lou 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux