Здравствуйте!
1) Научите, пожалуйста, скачивать видео-файлы, например, с kinogo.co, с помощью программы uGet. Пытался копировать ссылку, а затем вставлять в менеджер, чтобы скачать видео, но ничего не получалось, закачивался лишь небольшой файл, с расширением html, а видео скачать не получалось. Что я делаю не так?
2) При подключении планшета Lenovо к ноутбуку, система (Linux Mint Cinnamon 17.3) его не видит, и он нигде не отображается в системе, хотя на планшете показывает, что он подключен к другому устройству. Как мне сделать так, чтобы все у меня работало и подключалось?
Заранее всем спасибо!
[РЕШЕНО] Как скачивать видео-файлы при помощи программы uGet?
 Сообщений: 0 |
| ||||||
 |
|||||||
Сообщений: 0 |
Код PHP: и выхлоп консоли выложите сюда.
Редактировалось: 1 раз (Последний: 19 июня 2016 в 16:45) | ||||||
Сообщений: 0 |
Спойлер
[ 1.701868] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>; [ 1.701917] PPP generic driver version 2.4.2 [ 1.701983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.701988] ehci-pci: EHCI PCI platform driver [ 1.702095] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.702101] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.702118] ehci-pci 0000:00:1a.0: debug port 2 [ 1.706029] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.706047] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd1a0a000 [ 1.715592] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.715626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.715628] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.715630] usb usb1: Product: EHCI Host Controller [ 1.715632] usb usb1: Manufacturer: Linux 3.19.0-32-generic ehci_hcd [ 1.715633] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.715749] hub 1-0:1.0: USB hub found [ 1.715755] hub 1-0:1.0: 2 ports detected [ 1.715934] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.715940] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.715956] ehci-pci 0000:00:1d.0: debug port 2 [ 1.719865] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.719879] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd1a09000 [ 1.731570] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.731602] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.731604] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.731606] usb usb2: Product: EHCI Host Controller [ 1.731607] usb usb2: Manufacturer: Linux 3.19.0-32-generic ehci_hcd [ 1.731609] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.731713] hub 2-0:1.0: USB hub found [ 1.731718] hub 2-0:1.0: 2 ports detected [ 1.731806] ehci-platform: EHCI generic platform driver [ 1.731815] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.731819] ohci-pci: OHCI PCI platform driver [ 1.731828] ohci-platform: OHCI generic platform driver [ 1.731837] uhci_hcd: USB Universal Host Controller Interface driver [ 1.731884] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12 [ 1.765654] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.765658] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.765785] mousedev: PS/2 mouse device common for all mice [ 1.766211] rtc_cmos 00:01: RTC can wake from S4 [ 1.766363] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.766396] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.766404] i2c /dev entries driver [ 1.766465] device-mapper: uevent: version 1.0.3 [ 1.766535] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com [ 1.766551] Intel P-state driver initializing. [ 1.766674] Consider also installing thermald for improved thermal control. [ 1.766679] ledtrig-cpu: registered to indicate activity on CPUs [ 1.766935] PCCT header not found. [ 1.766937] ACPI PCC probe failed. [ 1.767042] TCP: cubic registered [ 1.767119] NET: Registered protocol family 10 [ 1.767317] NET: Registered protocol family 17 [ 1.767334] Key type dns_resolver registered [ 1.767638] Loading compiled-in X.509 certificates [ 1.768356] Loaded X.509 cert 'Magrathea: Glacier signing key: 0c8befe0c1e289e4d8990926117ada3bdfeb419c' [ 1.768369] registered taskstats version 1 [ 1.770078] Key type trusted registered [ 1.773079] Key type encrypted registered [ 1.773087] AppArmor: AppArmor sha1 policy hashing enabled [ 1.773091] ima: No TPM chip found, activating TPM-bypass! [ 1.773109] evm: HMAC attrs: 0x1 [ 1.773647] Magic number: 4:204:374 [ 1.773674] pci 0000:02:00.2: hash matches [ 1.773681] acpi LNXVIDEO:00: hash matches [ 1.773753] rtc_cmos 00:01: setting system clock to 2016-06-19 09:23:51 UTC (1466328231) [ 1.773830] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.773830] EDD information not available. [ 1.773889] PM: Hibernation image not present or could not be loaded. [ 1.774163] Freeing unused kernel memory: 1408K (ffffffff81d27000 - ffffffff81e87000) [ 1.774164] Write protecting the kernel read-only data: 12288k [ 1.774339] Freeing unused kernel memory: 260K (ffff8800017bf000 - ffff880001800000) [ 1.774427] Freeing unused kernel memory: 340K (ffff880001bab000 - ffff880001c00000) [ 1.783355] systemd-udevd[120]: starting version 204 [ 1.800956] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.895446] tsc: Refined TSC clocksource calibration: 2494.333 MHz [ 2.031295] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.043281] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.163879] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.163882] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.164302] hub 1-1:1.0: USB hub found [ 2.164497] hub 1-1:1.0: 6 ports detected [ 2.175689] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.175699] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.176239] hub 2-1:1.0: USB hub found [ 2.176377] hub 2-1:1.0: 6 ports detected [ 2.210278] pps_core: LinuxPPS API ver. 1 registered [ 2.210280] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>; [ 2.211377] PTP clock support registered [ 2.213902] [drm] Initialized drm 1.1.0 20060810 [ 2.214174] tg3.c:v3.137 (May 11, 2014) [ 2.217133] sdhci: Secure Digital Host Controller Interface driver [ 2.217135] sdhci: Copyright(c) Pierre Ossman [ 2.219424] ahci 0000:00:1f.2: version 3.0 [ 2.219648] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.219681] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode [ 2.219686] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst [ 2.227867] scsi host0: ahci [ 2.228208] scsi host1: ahci [ 2.230988] scsi host2: ahci [ 2.234980] scsi host3: ahci [ 2.235116] scsi host4: ahci [ 2.235224] scsi host5: ahci [ 2.235288] ata1: SATA max UDMA/133 abar m2048@0xd1a08000 port 0xd1a08100 irq 25 [ 2.235292] ata2: SATA max UDMA/133 abar m2048@0xd1a08000 port 0xd1a08180 irq 25 [ 2.235293] ata3: DUMMY [ 2.235294] ata4: DUMMY [ 2.235295] ata5: DUMMY [ 2.235296] ata6: DUMMY [ 2.243425] [drm] Memory usable by graphics device = 2048M [ 2.243431] [drm] Replacing VGA console driver [ 2.243881] Console: switching to colour dummy device 80x25 [ 2.267025] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.267032] [drm] Driver supports precise vblank timestamp query. [ 2.267143] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 2.271929] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address dc:0e:a1:99:fd:eb [ 2.271933] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 2.271934] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.271936] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 2.272124] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10) [ 2.272326] sdhci-pci 0000:02:00.1: No vmmc regulator found [ 2.272328] sdhci-pci 0000:02:00.1: No vqmmc regulator found [ 2.273561] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA 64-bit [ 2.295520] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.312939] fbcon: inteldrmfb (fb0) is primary device [ 2.434746] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 2.446768] usb 2-1.1: new full-speed USB device number 3 using ehci-pci [ 2.543730] usb 2-1.1: New USB device found, idVendor=045e, idProduct=07fd [ 2.543735] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.543738] usb 2-1.1: Product: Microsoft Nano Transceiver 1.1 [ 2.543741] usb 2-1.1: Manufacturer: Microsoft [ 2.547067] hidraw: raw HID events driver (C) Jiri Kosina [ 2.554526] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.554835] usbcore: registered new interface driver usbhid [ 2.554836] usbhid: USB HID core driver [ 2.556206] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07FD.0001/input/input7 [ 2.578045] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d20c [ 2.578049] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.578053] usb 1-1.3: Product: 1.3M HD WebCam [ 2.578056] usb 1-1.3: Manufacturer: SuYin [ 2.578059] usb 1-1.3: SerialNumber: HF2015-A821-OV01-VA-R01.01.01 [ 2.584092] ata1.00: ATA-8: TOSHIBA MK5059GSXP, GN003J, max UDMA/100 [ 2.584096] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.585156] ata1.00: configured for UDMA/100 [ 2.585407] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5059GS 3J PQ: 0 ANSI: 5 [ 2.585726] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.585727] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.585789] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.585811] sd 0:0:0:0: [sda] Write Protect is off [ 2.585814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.585838] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.610544] hid-generic 0003:045E:07FD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input0 [ 2.612328] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07FD.0002/input/input8 [ 2.641894] sda: sda1 sda2 sda3 [ 2.642340] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.666506] hid-generic 0003:045E:07FD.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input1 [ 2.666777] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07FD.0003/input/input9 [ 2.666900] hid-generic 0003:045E:07FD.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input2 [ 2.894388] Switched to clocksource tsc [ 2.903318] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.906775] ata2.00: ATAPI: HL-DT-ST DVDRAM GT51N, 1.00, max UDMA/100 [ 2.912362] ata2.00: configured for UDMA/100 [ 2.925728] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT51N 1.00 PQ: 0 ANSI: 5 [ 2.947980] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.947982] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.948122] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.948188] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.066423] Console: switching to colour frame buffer device 170x48 [ 3.068631] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.068634] i915 0000:00:02.0: registered panic notifier [ 3.172300] acpi device:2e: registered as cooling_device4 [ 3.172388] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10 [ 3.172504] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20141107/video-1230) [ 3.172680] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no) [ 3.172687] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359) [ 3.172692] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802570d0168), AE_NOT_FOUND (20141107/psparse-536) [ 3.172705] ACPI Error: [\_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure, AE_NOT_FOUND (20141107/psargs-359) [ 3.172709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff8802570d0168), AE_NOT_FOUND (20141107/psparse-536) [ 3.172766] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/LNXVIDEO:01/input/input11 [ 3.172844] [drm] Initialized i915 1.6.0 20141121 for 0000:00:02.0 on minor 0 [ 3.740789] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.803464] psmouse serio1: synaptics: queried max coordinates: x [..5774], y [..5022] [ 3.977442] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1694, fw id: 705179 [ 4.091418] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 4.210538] random: nonblocking pool is initialized [ 13.709774] Adding 7813116k swap on /dev/sda2. Priority:-1 extents:1 across:7813116k FS [ 13.808219] systemd-udevd[391]: starting version 204 [ 13.943371] lp: driver loaded but no devices found [ 13.947593] ppdev: user-space parallel port driver [ 14.014988] wmi: Mapper loaded [ 14.024059] acer_wmi: Acer Laptop ACPI-WMI Extras [ 14.024072] acer_wmi: Function bitmap for Communication Button: 0x1 [ 14.024077] acer_wmi: Brightness must be controlled by acpi video driver [ 14.024388] input: Acer WMI hotkeys as /devices/virtual/input/input12 [ 14.024872] input: Acer BMA150 accelerometer as /devices/virtual/input/input13 [ 14.270282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.293616] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 14.331559] cfg80211: Calling CRDA to update world regulatory domain [ 14.366492] AVX version of gcm_enc/dec engaged. [ 14.366496] AES CTR mode by8 optimization enabled [ 14.367826] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin [ 14.374555] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 14.375201] rtlwifi: rtlwifi: wireless switch is on [ 14.399905] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20141107/utaddress-258) [ 14.399913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.399917] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 14.399922] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258) [ 14.399927] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.399929] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 14.399933] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258) [ 14.399937] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.399938] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20141107/utaddress-258) [ 14.399942] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20141107/utaddress-258) [ 14.399946] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 14.399947] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 14.408868] intel_rapl: Found RAPL domain package [ 14.408872] intel_rapl: Found RAPL domain core [ 14.408875] intel_rapl: Found RAPL domain uncore [ 14.415086] device-mapper: multipath: version 1.7.0 loaded [ 14.460994] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 14.460998] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.461001] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 14.461003] sound hdaudioC0D0: mono: mono_out=0x0 [ 14.461004] sound hdaudioC0D0: inputs: [ 14.461007] sound hdaudioC0D0: Internal Mic=0x1b [ 14.461009] sound hdaudioC0D0: Mic=0x18 [ 14.477324] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 14.477885] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 14.477957] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 14.718096] cfg80211: World regulatory domain updated: [ 14.718100] cfg80211: DFS Master region: unset [ 14.718101] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 14.718103] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.718105] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.718106] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.718108] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.718109] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 14.885740] media: Linux media interface: v0.10 [ 14.892524] Linux video capture interface: v2.00 [ 14.901801] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (064e:d20c) [ 14.904772] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input17 [ 14.904844] usbcore: registered new interface driver uvcvideo [ 14.904846] USB Video Class driver (1.1.1) [ 15.075839] nvidia: module license 'NVIDIA' taints kernel. [ 15.075849] Disabling lock debugging due to kernel taint [ 15.078211] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 15.082009] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 15.082073] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none [ 15.082261] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1 [ 15.082268] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.63 Sat Nov 7 21:25:42 PST 2015 [ 15.105315] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 15.599016] init: failsafe main process (795) killed by TERM signal [ 16.003945] Bluetooth: Core ver 2.20 [ 16.003963] NET: Registered protocol family 31 [ 16.003965] Bluetooth: HCI device and connection manager initialized [ 16.003969] Bluetooth: HCI socket layer initialized [ 16.003973] Bluetooth: L2CAP socket layer initialized [ 16.003979] Bluetooth: SCO socket layer initialized [ 16.007419] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.007423] Bluetooth: BNEP filters: protocol multicast [ 16.007427] Bluetooth: BNEP socket layer initialized [ 16.010906] Bluetooth: RFCOMM TTY layer initialized [ 16.010914] Bluetooth: RFCOMM socket layer initialized [ 16.010919] Bluetooth: RFCOMM ver 1.11 [ 16.161642] init: cups main process (863) killed by HUP signal [ 16.161654] init: cups main process ended, respawning [ 17.562933] init: samba-ad-dc main process (1119) terminated with status 1 [ 17.821018] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.483179] vboxdrv: Found 4 processor cores [ 18.502147] vboxdrv: TSC mode is Invariant, tentative frequency 2494326506 Hz [ 18.502150] vboxdrv: Successfully loaded version 5.0.2 (interface 0x00230003) [ 18.705063] VBoxNetFlt: Successfully started. [ 18.706346] VBoxNetAdp: Successfully started. [ 18.707702] VBoxPciLinuxInit [ 18.709661] vboxpci: IOMMU not found (not registered) [ 19.012783] bbswitch: version 0.7 [ 19.012789] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 19.012793] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP [ 19.012801] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 19.012856] bbswitch: detected an Optimus _DSM function [ 19.012864] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on [ 19.016707] [drm] Module unloaded [ 19.034000] bbswitch: disabling discrete graphics [ 19.034011] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95) [ 19.049271] pci 0000:01:00.0: Refused to change power state, currently in D0 [ 19.546687] init: plymouth-upstart-bridge main process ended, respawning [ 19.550998] init: plymouth-upstart-bridge main process (1544) terminated with status 1 [ 19.551008] init: plymouth-upstart-bridge main process ended, respawning [ 20.619374] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex [ 20.619383] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX [ 20.619384] tg3 0000:02:00.0 eth0: EEE is enabled [ 20.619398] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8765.868677] systemd-hostnamed[5455]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 9539.281046] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 9856.186693] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) [ 9856.186694] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [ 9856.186698] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9856.186700] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9856.186722] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9856.186723] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [ 9856.188716] CPU1: Core temperature/speed normal [ 9856.188717] CPU0: Core temperature/speed normal [ 9856.188720] CPU0: Package temperature/speed normal [ 9856.188724] CPU1: Package temperature/speed normal [ 9856.188751] CPU2: Package temperature/speed normal [ 9856.188753] CPU3: Package temperature/speed normal [ 9887.043073] mce: [Hardware Error]: Machine check events logged [10191.639968] CPU1: Core temperature above threshold, cpu clock throttled (total events = 15) [10191.639969] CPU0: Core temperature above threshold, cpu clock throttled (total events = 15) [10191.639971] CPU3: Package temperature above threshold, cpu clock throttled (total events = 15) [10191.639972] CPU2: Package temperature above threshold, cpu clock throttled (total events = 15) [10191.639973] CPU0: Package temperature above threshold, cpu clock throttled (total events = 15) [10191.639983] CPU1: Package temperature above threshold, cpu clock throttled (total events = 15) [10191.640984] CPU0: Core temperature/speed normal [10191.640984] CPU1: Core temperature/speed normal [10191.640986] CPU3: Package temperature/speed normal [10191.640987] CPU2: Package temperature/speed normal [10191.640987] CPU1: Package temperature/speed normal [10191.640994] CPU0: Package temperature/speed normal [10336.461456] mce: [Hardware Error]: Machine check events logged [10494.055031] CPU1: Core temperature above threshold, cpu clock throttled (total events = 368) [10494.055032] CPU0: Core temperature above threshold, cpu clock throttled (total events = 368) [10494.055034] CPU3: Package temperature above threshold, cpu clock throttled (total events = 433) [10494.055035] CPU2: Package temperature above threshold, cpu clock throttled (total events = 433) [10494.055036] CPU0: Package temperature above threshold, cpu clock throttled (total events = 433) [10494.055045] CPU1: Package temperature above threshold, cpu clock throttled (total events = 433) [10494.056012] CPU1: Core temperature/speed normal [10494.056012] CPU0: Core temperature/speed normal [10494.056014] CPU3: Package temperature/speed normal [10494.056015] CPU2: Package temperature/speed normal [10494.056015] CPU0: Package temperature/speed normal [10494.056023] CPU1: Package temperature/speed normal [10705.172835] traps: chrome[4926] general protection ip:7f78d4b4cba0 sp:7ffd1b33bc80 error:0 in chrome[7f78d1968000+5d99000] [10784.112726] systemd-hostnamed[6980]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [10785.879864] mce: [Hardware Error]: Machine check events logged [11256.201532] usb 2-1.1: USB disconnect, device number 3 [11256.522920] usb 2-1.1: new full-speed USB device number 4 using ehci-pci [11256.619972] usb 2-1.1: New USB device found, idVendor=045e, idProduct=07fd [11256.619982] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [11256.619987] usb 2-1.1: Product: Microsoft Nano Transceiver 1.1 [11256.619991] usb 2-1.1: Manufacturer: Microsoft [11256.622588] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:07FD.0004/input/input18 [11256.675171] hid-generic 0003:045E:07FD.0004: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input0 [11256.680068] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/0003:045E:07FD.0005/input/input19 [11256.735316] hid-generic 0003:045E:07FD.0005: input,hiddev0,hidraw1: USB HID v1.11 Device [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input1 [11256.737394] input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.2/0003:045E:07FD.0006/input/input20 [11256.791182] hid-generic 0003:045E:07FD.0006: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.1/input2 [14162.641930] systemd-hostnamed[8531]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [14915.000521] usb 2-1.2: new high-speed USB device number 5 using ehci-pci [14915.182689] usb 2-1.2: New USB device found, idVendor=174c, idProduct=5106 [14915.182700] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [14915.182706] usb 2-1.2: Product: StoreJet Transcend [14915.182710] usb 2-1.2: Manufacturer: StoreJet Transcend [14915.182714] usb 2-1.2: SerialNumber: S3PTBR7R [14915.293593] usb-storage 2-1.2:1.0: USB Mass Storage device detected [14915.293917] scsi host6: usb-storage 2-1.2:1.0 [14915.294218] usbcore: registered new interface driver usb-storage [14915.308283] usbcore: registered new interface driver uas [14916.319164] scsi 6:0:0:0: Direct-Access StoreJet Transcend 0 PQ: 0 ANSI: 6 [14916.320138] sd 6:0:0:0: Attached scsi generic sg2 type 0 [14916.320947] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [14916.322036] sd 6:0:0:0: [sdb] Write Protect is off [14916.322053] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00 [14916.323713] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [14916.396427] sdb: sdb1 [14916.400045] sd 6:0:0:0: [sdb] Attached SCSI disk [15244.507684] systemd-hostnamed[9873]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [15702.586640] usb 2-1.2: USB disconnect, device number 5 [15702.589268] sd 6:0:0:0: [sdb] FAILED Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [15702.589279] sd 6:0:0:0: [sdb] CDB: [15702.589285] Read(10): 28 00 3a 38 4b 38 00 00 08 00 [15702.589310] blk_update_request: I/O error, dev sdb, sector 976767800 [15702.594490] sd 6:0:0:0: [sdb] Synchronizing SCSI cache [15702.594573] sd 6:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [16266.970920] usb 2-1.2: new high-speed USB device number 6 using ehci-pci [16267.063791] usb 2-1.2: New USB device found, idVendor=17ef, idProduct=7730 [16267.063801] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=4 [16267.063807] usb 2-1.2: Product: Lenovo A7600 [16267.063811] usb 2-1.2: SerialNumber: HJA2437H Редактировалось: 1 раз (Последний: 19 июня 2016 в 17:02) | ||||||
Сообщений: 0 |
Посмотрел. У вас перегрев ЦПУ Код PHP: А теперь по делу. Планшет определился, думаю вам имеет смысл почитать воттут (на английском) и тут (на русском). Также можете посмотреть видео.
Редактировалось: 1 раз (Последний: 19 июня 2016 в 19:11) | ||||||
Сообщений: 0 |
ObamaCyborg1975, Благодарю за помощь! | ||||||
Сообщений: 0 |
Все получилось, спасибо! |
| В начало страницы |
| Перейти на форум: |
Реклама Google